Installation

Surface must be dry and free of any loose debris. Pavement / Curb / Road Drain Markers

Surface must be dry and free
of any loose debris.

Follow the Adhesive Guide and apply adhesive. Pavement / Curb / Road Drain Markers

Follow the Adhesive Guide
and apply adhesive
.

Stick it! Pavement / Curb / Road Drain Markers

Stick it!  Push marker down on application surface forcing a bead of adhesive out around the entire edge.  It is important that the entire edge of the marker is sealed.

das Adhesives are offered for use exclusively with das Curb Markers.

das Curb Marker Adhesive™ #RS-222-5  / #RS-222-11
It is a single part adhesive which requires no mixing or special surface preparation.  The das Curb Marker Adhesive provides a permanent bond to concrete, asphalt, metal, or just about any flat non-soil surface.  It can be used to apply das Curb Markers to vertical or horizontal surfaces.  Black in color.

Recommended application temperature range is 40-90 F.  It will skin over in an hour, be firm within 2 hours, and achieve a full cure within 18 hours.* 

das Curb Marker Adhesive is available in either a 5 oz. re-sealable squeeze tube (recommended for volunteers) or for larger jobs; an 11 oz. cartridge for use with any standard caulk gun.

It will remain resilient and withstand freeze-thaw conditions without loss of adhesion for years.  Excellent impact resistance, long term bonding, easy application, and low cost make it the choice for most applications.  Proven performance since 1983.

*Cure times may vary due to weather conditions.
**das can offer a variety of specialty adhesives for unusual applications. Contact das for recommendations.

Optional Screw on Control Tip is available for 5 oz. Squeeze Tube.

das Economy Urethane Adhesive™ #DAS-229-11
An economical alternative adhesive to #RS-222.  Only available in 11 oz. Cartridge.  Gray in color.  Excellent long term adhesion.

das Rapid Set Urethane Adhesive™ #DAS-224-11
For special situations where a rapid cure is desirable.  Only available in 11 oz. Cartridge.  Black in color.  Sets up hard in two hours.

das Super Elastomeric Adhesive™ #DAS-234-11
Solvent free.  “ No V.OC.” alternative adhesive.  Only available in 11 oz. Cartridge.  Tan in color.

das Quickstik Epoxy Putty™ #QS-888
The das Quickstik is a hand malleable 2 part epoxy putty in a 4 oz. stick.  It will cure in approximately 5 minutes.  Gray in color.  Recommended for use in special situations requiring quick set-up or extreme surface temperatures.

das Adhesive Pads™ #AP-2.5  / #AP-4.0
A butyl adhesive with a paper liner on both sides offers a fast and simple application.  Solvent free.  Black in color.  Stock 2 ½” and 4” Circles.  Custom shapes and sizes are also available. 

Peel & Stick Option
PeelStick

Contact Us
Stick It & Mark It Permanently!
Since 1983 the das Curb Marker has been used successfully by customers nationally and internationally.
das Curb Markers can be easily installed on most flat surfaces such as concrete, asphalt and metal.


Custom Markers

Custom das Curb Markers can be made in just about any size, shape or color with virtually any message or language. All Custom markers are available in Economark, Standard or Duracast Style. Options such as No-Slip finish, Reflective or Non-Reflective, Numbering, Bar-Coding, to name a few, are available.

The possibilities are endless!

Custom Markers


More Examples of Custom Markers

Custom das Curb Markers can be made in just about any size, shape or color with virtually any message or language. All Custom markers are available in Economark, Standard or Duracast Style. Options such as No-Slip finish, Reflective or Non-Reflective, Numbering, Bar-Coding, to name a few, are available.

The possibilities are endless!